Protoss-PW11 User Manual
http://www.hi-flying.com - 14 -
3. NETWORK STRUCTURE
3.1. Wireless Network
Product can be set as a wireless STA and AP as well. And logically, it supports two wireless interfaces,
one is used as STA and the other is AP. Other STA devices can join into the wireless network through
AP interface. So it can provide flexible networking method and network topology.
AP: Wireless access point which is the central joint. Usually, wireless router is a AP, other STA
devices can connect with AP to join the network.
STA: Wireless station which is terminal of a wireless network. Such as laptop and pad etc.
3.1.1. AP Network
All the STA devices connect to the device AP transfer data to PLC device. Note the STA devices can
not communicate to each other due to PW11 does not support router function, if need this function,
use PW21/HF2211/HF2221
Figure 6. General AP Network
To Next Page
Loading...
Need help?
General