HIKVISION DS-2AE4225TI-D User Manual

HD-TVI Speed Dome User Manual
35
(1) Enter MAIN MENUS > DOME SETTINGS > ALARMS > ALARM SETTING and choose the alarm
number that you want to link the alarm output to.
(2) Move the cursor to AUXS and click IRIS+ to configure the alarm output to the alarm. You can
choose OPEN to active AUX 1.
3.6 Others
3.6.1 Restoring Default Dome Settings
Purpose:
You can reset all dome settings to factory default parameters as shown in below.
Dome settings are mainly of PTZ parameters and alarm parameters, and also include some
system settings, e.g. dome address.
Enter default dome settings menu:
MAIN MENUS > RESTORE DEFAUTLS
Click IRIS+ to restore the dome settings to the default value, or click IRIS- to exit.
3.6.2 Restoring Default Camera Settings
Enter MAIN MENU > RESTORE CAMERA
Click IRIS+ to restore the camera settings to the default value; or click IRIS- to exit.
3.6.3 Rebooting the Dome
Enter MAIN MENU > REBOOT DOME and click IRIS+ to reboot the speed dome.

HIKVISION DS-2AE4225TI-D Specifications

General

Brand	HIKVISION
Model	DS-2AE4225TI-D
Category	Security Camera
Language	English