HIKVISION DS-2AE7232TI-A Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
31
Answer
 Please check whether the protective film of the bubble has been removed.
 Please check whether there are foreign objects on the bubble or the lens.
 Please check where there are obstructions such as spider web nearby.
 Open the bubble and check whether the lens cover has been removed.
 Restore the device to the default settings. Call the preset 95 to enter the OSD menu and select
the RESTORE CAMERA.
Question
For the IR speed dome, the image is abnormal white when the IR light is turned on in the night.
Answer
 Please check whether there are obstructions near the lens, e.g. wall, leaf, spider web, cables, etc.,
which will cause the over-exposure due to the IR light reflection. Clear the obstructions if
necessary.
Question
The speed dome cannot focus when working in the indoor condition.
Answer
 Please restore the device to the default to exclude the factor of incorrect configuration.
 Reduce the minimum focusing distance of the device by configuring the image settings through
the OSD menu.

HIKVISION DS-2AE7232TI-A Specifications

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C

Weight and Dimensions

Height	353.4 mm
Weight	4500 g
Diameter	220 mm