HIKVISION DS-2AE7232TI-A Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
30
4 Troubleshooting
4.1 Device Exceptions
Question
Why does the speed dome fail to start or repeatedly reboot? Why does the speed dome restart
intermittently when controlling PTZ, calling presets or turning on the infrared lights of the IR dome
at night?
Answer
 Check the supply voltage of the dome. Ensure the supply voltage to meet the power
requirements of the speed dome. The nearest power supply is recommended.
 Check whether the diameter of the power wire meet the standards.
4.2 PTZ Control Exceptions
Question
The speed dome cannot do PTZ control but can do zoom control.
Answer
 For the 5 inch speed dome, you need to remove the protective sticker and foam of the camera
module by opening the bubble, correctly install the speed dome again and then wire up.
 For IR speed dome, please remove the protective sticker and then wire up.
Question
Neither zoom control nor PTZ control is available for the speed dome.
Answer
 Check the supply voltage of the dome. Ensure the supply voltage to meet the power
requirements of the speed dome. The nearest power supply is recommended.
 Check whether the diameter of the power wire meet the standards.
4.3 Other Questions
Question
The preview image of the speed dome is not clear.

HIKVISION DS-2AE7232TI-A Specifications

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C

Weight and Dimensions

Height	353.4 mm
Weight	4500 g
Diameter	220 mm