User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
IP Server:
Steps:
(1) Enter the Server Address of the IP Server.
(2) Click to save the settings.
Note: For the IP Server, You have to apply a static IP, subnet mask, gateway and
preferred DNS from the ISP. The Server Address should be entered with the
static IP address of the computer that runs the IP Server software.
Figure 5-13 IPServer Settings
HKDDNS
Steps:
(1) Choose the DDNS Type as HKDDNS.
(2) Enter the Server Address www.hik-online.com
(3) Enter the Domain name of the camera. The domain is the same with the
device alias in the HKDDNS server.
(4) Click to save the new settings.
Note: It will ask for a reboot for the settings to take effect.
5.3.5 Configuring SNMP Settings
Purpose:
You can use SNMP to get camera status, parameters and alarm related information.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to
receive the camera information via SNMP port. By setting the Trap Address, the
camera can send the alarm event and exception messages to the surveillance center.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
