Network Mini Dome Camera·Quick Start Guide
Press the WPS button (about 2s) on the camera within 120s 2.
you enable the WPS of the router to join in the wireless
network.
The WPS button works as a reset button only when you
press it when the camera is powering on.
Press the WPS button on the camera, and then press the
WPS button on the router will establish a connection as
well, and the expire time of WPS connection on the
camera is 120s.
The link indicator blinks if the wireless connection is
succeeded.
1.3 Overview of Type III Mini Dome Camera
Figure 1-4 Overview of Type III Mini Dome Camera