EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2532F-I

HIKVISION DS-2CD2532F-I User Manual

HIKVISION DS-2CD2532F-I
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
User Manual of Network Camera
104
Appendix 2 Port Mapping
The following settings are for TP-LINK router (TL-WR641G). The settings vary
depending on different models of routers.
Steps:
1. Select the WAN Connection Type, as shown below:
Figure A.2.1 Select the WAN Connection Type
2. Set the LAN parameters of the router as in the following figure, including IP
address and subnet mask settings.
Figure A.2.2 Set the LAN parameters
3. Set the port mapping in the virtual severs of Forwarding. By default, camera uses
port 80, 8000 and 554. You can change these ports value with web browser or
client software.
Example:
When the cameras are connected to the same router, you can configure the ports of
a camera as 80, 8000, and 554 with IP address 192.168.1.23, and the ports of

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2532F-I and is the answer not in the manual?

HIKVISION DS-2CD2532F-I Specifications

General IconGeneral
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Form factorDome
Mounting typeCeiling
Product colorWhite
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p
Image quality adjustmentBrightness, Contrast, Saturation
Video compression formatsH.264, M-JPEG
Supported graphics resolutions1920 x 1080 (HD 1080), 2048 x 1536 (QXGA)
Pan range-30 - 30 °
Tilt angle range0 - 75 °
Angle of rotation360 °
Camera shutter typeElectronic
Camera shutter speed1/3 - 1/100000 s
Minimum illumination0 lx
Field of view (FOV) angle70 °
Sensor typeCMOS
Optical sensor size1/3 \
Fixed focal length- mm
Maximum aperture number2
Password protection typeUser
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
LED typeIR
Night vision distance10 m
Cabling technology10/100Base-T(X)
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Number of cameras1
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Power source typePoE
Power consumption (max)5 W
InterfaceRJ-45
Audio formats supportedG.711, G.726
Lens mount interfaceM12
Weight and Dimensions IconWeight and Dimensions
Depth96.7 mm
Width99.3 mm
Height52.8 mm
Weight600 g

Related product manuals