EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD2532F-I

HIKVISION DS-2CD2532F-I User Manual

HIKVISION DS-2CD2532F-I
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
User Manual of Network Camera
34
6.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
1. Enter the Time Settings interface:
Configuration > Basic Configuration > System > Time Settings
Or Configuration > Advanced Configuration > System > Time Settings
Figure 6-2 Time Settings
Select the Time Zone.
Select the Time Zone of your location from the drop-down menu.
Synchronizing Time by NTP Server.
(1) Check the checkbox to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD2532F-I and is the answer not in the manual?

HIKVISION DS-2CD2532F-I Specifications

General IconGeneral
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Form factorDome
Mounting typeCeiling
Product colorWhite
International Protection (IP) codeIP66
Total megapixels3 MP
Maximum resolution2048 x 1536 pixels
Supported video modes1080p
Image quality adjustmentBrightness, Contrast, Saturation
Video compression formatsH.264, M-JPEG
Supported graphics resolutions1920 x 1080 (HD 1080), 2048 x 1536 (QXGA)
Pan range-30 - 30 °
Tilt angle range0 - 75 °
Angle of rotation360 °
Camera shutter typeElectronic
Camera shutter speed1/3 - 1/100000 s
Minimum illumination0 lx
Field of view (FOV) angle70 °
Sensor typeCMOS
Optical sensor size1/3 \
Fixed focal length- mm
Maximum aperture number2
Password protection typeUser
Built-in HDDNo
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
LED typeIR
Night vision distance10 m
Cabling technology10/100Base-T(X)
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Number of cameras1
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 95 %
Power source typePoE
Power consumption (max)5 W
InterfaceRJ-45
Audio formats supportedG.711, G.726
Lens mount interfaceM12
Weight and Dimensions IconWeight and Dimensions
Depth96.7 mm
Width99.3 mm
Height52.8 mm
Weight600 g

Related product manuals