Network Fisheye Camera·Quick Start Guide
7. To disassemble the camera, refer to the Step 5 in Section 2.1.
8. To adjust the view angle, refer to the Step 6 in Section 2.1.
9. To install the water-proof jacket for network interface (optional),
refer to the Step 7 in Section 2.1.
Pendant Mounting with a Bracket 2.4
You have to purchase the bracket separately if this mounting method
is selected.
1. Fix the pendant bracket to the wall with the supplied screws.
Fix the Bracket Figure 2-17
2. Aim the screwed hole on the camera at the top of the pendant
bracket, and then rotate the camera until it is secured tightly.
To Next Page
Loading...
Need help?
General
