HIKVISION DS-2CD6362F-I Quick Operation Guide

Network Fisheye Camera·Quick Operation Guide
17
17
2.3 Wall Mounting with a Junction Box
You have to purchase a junction box separately if this mounting
method is selected.
Steps:
1. Fix the junction box to the wall with screws.
Fix the Junction Box Figure 2-9
2. Screw the three supplied screws half-deep to the junction box.
3. Connect the corresponding power cable, network cable, audio
and alarm cables.
4. Align the screw holes to the inserted screws, hook the camera
body to the screws, and route the camera body to secure the
camera with the screws.
5. Screw the half-deep screws into the wall totally.

HIKVISION DS-2CD6362F-I Specifications

General

Type	IP security camera
PTZ control	Yes
Placement supported	Indoor
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
Total megapixels	6 MP
Maximum resolution	3072 x 2048 pixels
Supported video modes	-
Video formats supported	H.264, M-JPEG
Supported graphics resolutions	1024 x 768 (XGA), 2048 x 1536 (QXGA)
Camera shutter speed	1/25 - 1/100000 s
Minimum illumination	0.3 lx
Field of view (FOV) angle	360 °
Sensor type	CMOS
Optical sensor size	1/1.8 \
Optical zoom	- x
Focus adjustment	2.8
Fixed focal length	- mm
Password protection type	User
Compatible memory cards	MicroSD (TransFlash), MicroSDXC
Maximum memory card size	64 GB
LED type	IR
Night vision distance	15 m
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Supported network protocols	TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTC P, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LAN (RJ-45) ports	1
Signal-to-Noise Ratio (SNR)	120 dB
DC output voltage	+12V
Power source type	PoE
Power consumption (max)	11 W
Operating temperature (T-T)	-10 - 60 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	152.8 mm
Width	164 mm
Height	43.8 mm
Weight	1400 g