Network Camera User Manual
57
You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS port.
Steps:
1. Enter the Port Settings interface, Configuration > Network > Basic Settings >
Port
Port Settings
2. Set the ports of the camera.
HTTP Port: The default port number is 80, and it can be changed to any port No.
which is not occupied.
RTSP Port: The default port number is 554 and it can be changed to any port No.
ranges from 1 to 65535.
HTTPS Port: The default port number is 443, and it can be changed to any port
No. which is not occupied.
Server Port: The default server port number is 8000, and it can be changed to
any port No. ranges from 2000 to 65535.
Note:
When you use client software to visit the camera and you have changed the
server port number, you have to input the correct server port number in login
interface to access to the camera.
WebSocket Port: The default port number is 7681. It can be changed to any port
No. ranges from 1 to 65535.
WebSockets Port: The default server port number is 7682. It can be changed to
any port No. ranges from 1 to 65535.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
