EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2CD7153-E

HIKVISION DS-2CD7153-E Installation Manual

HIKVISION DS-2CD7153-E
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Installation Manual of Network Mini Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety regulations of the
nation and region.
2. Source with DC 12V according to the IEC60950-1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.If use the POE as the power supply, please make sure that
the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

Other manuals for HIKVISION DS-2CD7153-E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2CD7153-E and is the answer not in the manual?

HIKVISION DS-2CD7153-E Specifications

General IconGeneral
TypeIP security camera
PTZ control-
Day/night modeYes
Placement supportedOutdoor
Connectivity technologyWired
Form factorDome
Product colorWhite
Protection featuresVandal proof
International Protection (IP) codeIP66
Total megapixels2 MP
Maximum resolution1600 x 1200 pixels
Supported video modes720p
Video formats supportedH.264, M-JPEG, MPEG4
Supported graphics resolutions1280 x 960, 1280 x 720 (HD 720), 1600 x 1200 (UXGA)
Pan range-15 - 15 °
Tilt angle range0 - 90 °
Angle of rotation15 °
Camera shutter speed1/25 - 1/100000 s
Minimum illumination0.1 lx
Field of view (FOV) angle68 °
Sensor typeCMOS
Optical sensor size1/3 \
Optical zoom- x
Focus adjustment1.8
Fixed focal length2.8 mm
Password protection typeUser
Wi-FiNo
Cabling technology10/100Base-T(X)
Supported network protocolsTCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1x, Qos (SIP, SRTP
Ethernet LAN (RJ-45) ports1
DC output voltage+12V
Power source typePoE
Power consumption (max)4 W
Weight and Dimensions IconWeight and Dimensions
Depth97.5 mm
Width99.9 mm
Height46.5 mm
Weight250 g

Related product manuals