HIKVISION DS-2CE11D0T-PIRL User Manual

alarm type only supported by the DVR can also triggers
the visible alarm in the camera.
 CAMERA
Select the TRIGGER MODE as CAMERA, the embedded
PIR module sends the alarm signal to the visible alarm
in the camera, when PIR module detected the alarm
source.
Note:
 Type I camera do not have LIGHTING mode.
 Under the LIGHTING mode, the image is colored all
the time, and there’s no DAY NIGHT settings in the
menu.
OFF
Select OFF to give up this function.
3.6.2 PIR LEVEL
Adjust the sensitivity of the PIR module, and the greater
the value is, the more sensitive the PIR module is.
3.7 FACTORY DEFAULT
Reset all the settings to the factory default.
3.8 EXIT
Move the cursor to EXIT and click Iris+ to exit the menu.
3.9 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save
the settings, and exit the menu.
UD10293B

HIKVISION DS-2CE11D0T-PIRL Specifications

General

Brand	HIKVISION
Model	DS-2CE11D0T-PIRL
Category	Security Camera
Language	English