HIKVISION DS-2CE16D0T-IR/IRP User Manual

Figure 1. 2 Type II Camera Overview
1.2.3 Type III Camera Overview
Enclosure
Trim Ring
Mounting
Base
Main Body
Video
Cable
Power
Cord
Figure 1. 3 Type III Camera Overview
Installation
Installation Preparation
Before you start:
 Make sure that the device in the package is in good
condition and all the assembly parts are included.
 Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.
 Check whether the power supply is matched with
your power output to avoid damage.
 Make sure the wall is strong enough to withstand
three times the weight of the camera and the
mounting bracket.
 If the wall is cement, you need to insert expansion
bolts before you install the camera. If the wall is
wooden, you can use self-tapping screws to secure
the camera.
 If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
Installation of Type I Camera
Steps:
1. Attach the dill template to the ceiling.
2. Drill the screw holes according to the drill template,
and the cable hole (optional) on the ceiling.
47.6
13.7
27.5
Φ
68
3
-
Φ
4
Unit： mm
Figure 2. 1 Drill Template
Note:
Cable hole is required when adopting ceiling outlet to
route the cable.

HIKVISION DS-2CE16D0T-IR/IRP Specifications

General

Brand	HIKVISION
Model	DS-2CE16D0T-IR/IRP
Category	Security Camera
Language	English