HIKVISION DS-2CE78U1T-IT1F User Manual

1.2.3 Overview of Type III Camera
DC12 VIN
Mounting
Base
Clip Plate
Main Body
Enclosure
Switch
Button
Power Cord
Video
Cable
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to switch the
video output. Four kinds of video outputs are available: TVI,
AHD, CVI, and CVBS.
1.2.4 Overview of Type IV Camera
Mounting Base
Tilt Adjusting
Screw
Pan Adjusting Screw
Bubble
Video Cable
Power
Cord
Switch
Button
Safety
Rope
Figure 1-4 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
2 Installation
Before you start:
 Make sure that the device in the package is in good
condition and all the assembly parts are included.
 Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.
 Check whether the power supply is matched with your
required output to avoid damage.
 Make sure the wall is strong enough to withstand three
times the weight of the camera and the bracket.
 If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use self-
tapping screw to secure the camera.
 If the product does not work properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.

HIKVISION DS-2CE78U1T-IT1F Specifications

General

Brand	HIKVISION
Model	DS-2CE78U1T-IT1F
Category	Security Camera
Language	English