Safety Instruction
These instructions are intended to ensure that user can user the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warning” and “Caution”
Warning: Serious injury or death may occur if any of the warning is neglected.
Caution: Injury or equipment damage may occur if any of the caution is neglected.
Warning
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and
region. Refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100-240 V
AC or 12 V DC according to the IEC60950-1 standard. Refer to technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.
Make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then contact the
service center.
To Next Page
Loading...
Need help?
General