HIKVISION DS-3E0109P-E User Manual

User Manual of Network Video Recorder DS-3E0109P-E
12
 Make sure the device is grounded well.
 Lightning Protection
In a thunderstorm weather, a sudden current may damage the device. To protect the device from lightning stroke or
strong current, please:
 Make sure the device, the installation desktop and power outlet on the wall all are well-grounded.
 Cable the device properly; and if you need to cable outdoors, it is advisable to set up with a signal lightning
arrester.
 Mounting Standards
No matter whether it is wall-mounting or desktop-mounting, follow the instructions below.
 The desktop is stable and sturdy enough.
 Place the device in a clean, dry and well-ventilated environment. Keep at least 10cm free on all sides for
cooling.
 Do not place any heavy or big size object on the device.
 Keep at least 1.5cm vertical distance between each device while installing it in stack.
2.2 Installation
The device supports two types of installation: wall-mounting and desktop-mounting. Install your device according
to the tools you have. Here DS-3E0109P-E is taken as an installation guide, which applies to DS-3E0105P-E.
Desktop-mounting
Find a flat and stable desktop and place the switch correctly.
Wall-mounting
Step 1: Prepare the following tools.
Figure 2.1 Installation Tools

HIKVISION DS-3E0109P-E Specifications

General

Brand	HIKVISION
Model	DS-3E0109P-E
Category	Switch
Language	English