HIKVISION DS-3E03 P Series User Manual

Installation Manual of DS-3E2300P Series Ethernet Switch
[选取日期]
- 11 -
Figure 3-5 Cable connection at the console port
3.3.2 Connecting the SFP Ports
DS-3E2300P provides 2 gigabit SFP optical ports. Each port corresponds to one indicator
respectively, which is used for indicating the port Link/ACT state. When the indicator is always on,
the link is normal; when it flickers, the data receives and forwards. To use the optical port, you
need connect it to the SFP optical module, and then to other Ethernet terminal devices through an
optical fiber.
Figure 3-6 Connecting the SFP ports and other Ethernet terminals
3.3.3 Connecting 100M Ethernet Base-T Ports
The DS-3E2300P switch has 16 10/100Base-TX ports. Each port has one indicator, which indicates
the state of Link/ACT. If the indicator is always on, the port is linked up; if the indicator flickers, the
data is transmitted on the port. The numbering order of the pins in the UTP port is the same as the
console port.

HIKVISION DS-3E03 P Series Specifications

General

Brand	HIKVISION
Model	DS-3E03 P Series
Category	Switch
Language	English