User Manual of Network Video Recorder
12
Lightning Protection
In a thunderstorm weather, a sudden current may damage the device. To protect the device from lightning stroke or
strong current, please:
Make sure the device, the installation desktop/rack and power outlet on the wall all are well-grounded.
Cable the device properly; and if you need to cable outdoors, it is advisable to set up with a signal lightning
arrester.
Mounting Standards
No matter whether it is rack-mounting or desktop-mounting, follow the instructions below.
The rack/desktop is stable and sturdy enough.
Place the device in a clean, dry and well-ventilated environment. Keep at least 10cm free on all sides for
cooling.
Do not place any heavy or big size object on the device.
Keep at least 1.5cm vertical distance between each device while installing it in stack.
Tools
Things you'll need but should be prepared by yourself.
Figure 2.1 Installation Tools
2.2 Installation
The device supports two types of installation: rack-mounting and desktop-mounting. Install your device according
to the tools you have.
Rack-mounting
You can install the device in a standard 19-inch rack with the accessories (L-shaped brackets and screws) come
with the box.
To Next Page
Loading...
Need help?
General