EasyManuals Logo
Home>HIKVISION>Switch>DS-3E1318P-EI

HIKVISION DS-3E1318P-EI User Manual

HIKVISION DS-3E1318P-EI
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
DS-3E1xxxP Series 100 Mbps PoE Switches Quick Start Guide
QSG DS-3E1xxxP Switch 012721NA 8
Rear Panel
Figure 1-3 DS-3E1X05/09P Series
Figure 1-4 DS-3E1318/26P Series
Port/Indicator Description
Indicator/Port
Description
PoE-MAX Indicator
Solid /Flashing: The output power of the switch will reach the upper limit. The
power supply may be abnormal if more devices are connected.
Unlit: The switch provides power supply to PD normally
PWR Indicator
Solid: The switch is powered on normally
Unlit: No power supply connected or power supply is abnormal
LINK/ACT Indicator
Solid: The port is connected
Flashing: The port is transmitting data
Unlit: The port is disconnected or connection is abnormal
PoE Indicator
Solid: The switch provides power supply to PD normally
Unlit: The switch is disconnected to PD or provides power supply to PD
abnormally
G1/G2 Port Indicator
Solid: The gigabit SFP fiber optical port is connected
Flashing: The gigabit SFP fiber optical port is transmitting data
Unlit: No gigabit SFP fiber optical port connected or connection is abnormal
100 Mbps PoE RJ-45 Port
Used for PD devices connection via network cables
100 Mbps RJ-45 Port Used for other devices connection via network cables
Gigabit Combo
When connected to a network cable, the combo is an RJ-45 port. When
plugged into an optical module and connected to an optical fiber, the combo
functions as a fiber optic port.
When connected to both the network cable and optical fiber at the same
time, the port works as a fiber optic port.
Grounding Terminal Used to connect to the grounding cable to protect the switch from lightning
Power Supply Use the attached power cord to connect the switch to socket

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-3E1318P-EI and is the answer not in the manual?

HIKVISION DS-3E1318P-EI Specifications

General IconGeneral
Switch type-
Product colorBlue
Housing materialMetal
Input current2.5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)250 W
Total Power over Ethernet (PoE) budget230 W
Power over Ethernet (PoE) ports quantity16
Power over Ethernet (PoE) power per port30 W
Storage temperature (T-T)-40 - 85 °C
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)5 - 95 %
10G supportNo
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Combo SFP ports quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeFast Ethernet (10/100)
Forwarding rate5.3568 Mpps
MAC address table16000 entries
Weight and Dimensions IconWeight and Dimensions
Depth220.8 mm
Width440 mm
Height44 mm
Weight2590 g

Related product manuals