HIKVISION DS-7100NI-Q1/P Series User Manual

Network Video Recorder User Manual
247
15.3 Configuring Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast, saturation, image
rotate and mirror for the live view and recording effect.
Step 1 Enter the Image Settings interface.
Menu > Camera >Image
Figure 15-4 Image Settings Interface
Step 2 Select the camera to set image parameters.
Step 3 Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or
saturation.
Step 4 Select the Enable Rotate function to Clockwise 270 degrees or OFF. When OFF is selected,
the image is restored to original.
Step 5 Select the Mirror Mode to Left-Right, Up-Down, Center or OFF. When OFF is selected, the
image is restored to original.

The Rotate and Mirror functions must be supported by the connected IP camera.

The image parameters adjustment can affect both the live view and the recording quality.
Step 6 Click the Apply button to save the settings.

HIKVISION DS-7100NI-Q1/P Series Specifications

General

Brand	HIKVISION
Model	DS-7100NI-Q1/P Series
Category	Network Hardware
Language	English