Digital Video Recorder User Manual
8
For DS-7608/7616HUHI-F/N and DS-7300/8100HQHI-F/N series DVR, the HDMI and VGA
interfaces can be configured to be simultaneous or independent. Up to 1920 × 1080/60 Hz
resolution is supported for VGA output and up to 4K (3840 × 2160)/30 Hz resolution is
supported for HDMI output.
For DS-7300/8100/9000HUHI-F/N series, there are two HDMI interfaces of which the HDMI1
and VGA interfaces share simultaneous output. For HDMI1/VGA output, up to 1920 × 1080
resolution is supported. For HDMI2 output, up to 4K (3840 × 2160) resolution is supported;
1/4/6/8/9/16/25/3 6 screen live view is supported, and the display sequence of screens is
adjustable;
For DS-7300/8100/9000HUHI-F/N series DVR, if the sum of the analog and IP channels exceeds 25,
up to 32-window division mode is supported for the VGA/HDMI1 output.
Live view screen can be switched in group and manual switch and automatic cycle live view are
also provided, the interval of automatic cycle can be adjusted;
For –F series DVR, CVBS output only serves as the aux output or live view output.
Quick setting menu is provided for live view;
The selected live view channel can be shielded;
Motion detection, video-tampering detection, video exception alarm, video loss alarm and
VCA alarm functions;
For DS-7300/8100/9000HUHI-F/N series DVR, 1-ch analog camera supports people counting
and heat map functions;
DS-7200/7300/8100/9000HUHI-F/N series DVR support VCA (line crossing detection and
intrusion detection) of all channels. DS-7600HUHI-F/N series DVR support 2-ch VCA (line
crossing detection and intrusion detection). HQHI series DVR exluding 7100 series support
2-ch VCA (line crossing detection and intrusion detection). For the analog channels, the line
crossing detection and intrusion detection conflict with other VCA detection such as sudden
scene change detection, face detection and vehicle detection and heat map or people
counting functions. You can only enable one function;
DS-7208/7216HUHI-F/N series DVR supports enhanced VCA mode to enable all-channel line
crossing detection and intrusion detection and disable 2K/4K output resolution. After you
enable it, you can also disable it and the line crossing detection and intrusion detection will be
supported by 2-ch only;
Privacy mask;
Several PTZ protocols (including Omnicast VMS of Genetec) supported; PTZ preset, patrol and
pattern;
Zooming in/out by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
To Next Page
Loading...
Need help?
General