EasyManuals Logo
Home>HIKVISION>DVR>DS-7116HGHI-F1

HIKVISION DS-7116HGHI-F1 Quick Start Guide

HIKVISION DS-7116HGHI-F1
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Digital Video Recorder Quick Start Guide
6
Safety Instructions
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
Ensure unit is installed in a well-ventilated, dust-free environment.
Unit is designed for indoor use only.
Keep all liquids away from the device.
Ensure environmental conditions meet factory specifications.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
Use the device in conjunction with an UPS if possible.
Power down the unit before connecting and disconnecting accessories and peripherals.
A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with
the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.

Other manuals for HIKVISION DS-7116HGHI-F1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7116HGHI-F1 and is the answer not in the manual?

HIKVISION DS-7116HGHI-F1 Specifications

General IconGeneral
Bit rate64 Kbit/s
CertificationCE
Product colorWhite
Channels quantity16 channels
Maximum frame rate30 fps
Audio output channels2.0 channels
Audio formats supportedG.711 μ-law
Multi-display supportedYes
Network connection typeRJ-45
Maximum video resolution1920 x 1080 pixels
Video compression formatsH.264, H.264+
Playback resolutions supported1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Audio input1x RCA
BNC input ports16
USB 2.0 ports quantity2
Number of users128 user(s)
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
HDD interfaceSerial ATA
Maximum HDD capacity6000 GB
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
DC voltage12 V
Power supply typeDC
Power consumption (typical)20 W
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width285 mm
Height45 mm
Weight1200 g

Related product manuals