EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-7608NI-Q2/8P

HIKVISION DS-7608NI-Q2/8P User Manual

HIKVISION DS-7608NI-Q2/8P
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
Network Video Recorder User Manual
159
Figure 11-5 QR Code for iOS Users
For the Android users, please scan the QR code below to download the Hik-Connect
application for the subsequent operations. You must install googleplay on your Android
mobile phone to skip to the address successfully.
Figure 11-6 QR Code for Android Users
Please refer to the help file on the official website (www.hik-connect.com) and the Hik-Connect
Mobile Client User Manual for adding the device to Hik-Connect and more operation instructions.
11.2.2 Configuring DDNS
Purpose:
You can set the Dynamic DNS (DDNS) for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the DDNS tab to enter the DDNS Settings interface.
Step 3 Check the DDNS checkbox to enable this feature.
Step 4 Select DDNS Type. Three DDNS types are selectable: DynDNS, PeanutHull, and NO-IP.
DynDNS:

Table of Contents

Other manuals for HIKVISION DS-7608NI-Q2/8P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NI-Q2/8P and is the answer not in the manual?

HIKVISION DS-7608NI-Q2/8P Specifications

General IconGeneral
DHCP clientYes
Input bandwidth80 Mbit/s
Maximum frame rate60 fps
Maximum resolution3840 x 2160 pixels
Alarm input channels1
Video input channels8 channels
Supported resolutions1024 x 768, 1280 × 720, 1280 × 1024, 1920 × 1080, 1600 × 1200, 3840 × 2160
Video recording modes720p, 1080p
Wi-FiNo
HDD capacity2000 GB
HDD interfaceSerial ATA
Maximum storage capacity16 TB
Number of HDDs supported2
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
Power over Ethernet (PoE) ports quantity8
Product colorBlack
Rack capacity1U
LED indicatorsLAN, Power, Status
AC input voltage100 - 240 V
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget80 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals