125
User Manual of Digital Video Recorder
8.1 Setting Motion Detection
Steps:
1.
Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion
detection.
Menu> Camera> Motion
Figure 8. 1 Motion Detection Setup Interface
2.
Set detection area and sensitivity.
Check checkbox to enable motion detection, use the mouse to draw detection area(s) and drag the
sensitivity bar to set sensitivity.
Click to set alarm response actions.
Figure 8. 2 Set Detection Area and Sensitivity
3.
Click
Trigger Channel
tab and select one or more channels which will start to record or become
full-screen monitoring when motion alarm is triggered.
Figure 8. 3 Set Trigger Camera of Motion Detection
4.
Set arming schedule of the channel.
Select
Arming Schedule
tab to set the channel’s arming schedule.
Choose one day of a week and up to eight time periods can be set within each day. Or you can click the
Copy
button to copy the time period settings to other day(s).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
