197
User Manual of Digital Video Recorder
Address
.
Password
: Set the password for the user account.
Level:
Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator:
The
Operator
user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
•
Guest:
The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User’s MAC Address:
The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4.
Click the
OK
button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in Figure 13. 7.
Figure 13. 7 Added User Listed in User Management Interface
5.
You can assign permissions for the added user.
(1)
Select the user from the list and then click button to enter the Permission settings interface, as
shown in Figure 13. 8.
Figure 13. 8 User Permission Settings Interface
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case letters,
lower case letters, numbers, and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
