User Manual of Digital Video Recorder
44
Figure 2. 18 Adding IP Camera Interface
2.
The online cameras with same network segment will be detected and displayed in the camera list.
3.
Select the IP camera from the list and click the button to add the camera (with the same admin
password of the DVR’s). Or you can click the One-touch Adding button to add all cameras (with the same
admin password) from the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the admin
password of the camera is the same with the DVR’s.
4.
(For the encoders with multiple channels only) check the
checkbox
of Channel Port in the pop-up window,
as shown in the following figure, and click OK to add multiple channels.
Figure 2. 19 Selecting Multiple Channels
OPTION 2:
Steps:
1)
On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP
To Next Page
Loading...
Need help?
General
Weight and Dimensions
