HIKVISION DS-K1103M Installation Manual

11
No.
Description
DIP
Switch Status
7
Wiegand Protocol
(available when No. 6 is 1)
1: Wiegand protocol
of 26-bit;
0: Wiegand protocol
of 34-bit.
8
Matched Resistance
(available for RS
-
485 protocol)
1: Enable;
0
:
Disable.
3.3 Definition of Cable
The description of 10 cables is shown below.
Table 3-3 Description of Cable
Color
Description
Yellow RS-485+
Brown
Blue LED Control (
ava
ilable for
Wiegand
Protocol)
Blue RS-485-
Purple
Beep Control (
available for
Wiegand
Protocol
)
Gray Case Sensor (available for Wiegand Protocol)
Green
Wiegand W0 (
available for
Wiegand
Protocol
)
White Wiegand W1 (available for Wiegand Protocol)
Black
GND
Orange Red LED Control (available for Wiegand Protocol)
Red PWR (DC +12V)
3.4 Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to
establish the communication between them.
Steps for RS-485 communication mode:

HIKVISION DS-K1103M Specifications

General

Brand	HIKVISION
Model	DS-K1103M
Category	Card Reader
Language	English