HIKVISION DS-K1T343 Series User Manual

Figure 8-4 Add Wi-Fi
2) Enter Wi-Fi Name and Wi-Fi Password, and select Working Mode and
Encrypon Type.
3) Tap Save.
4.
Select the Wi-Fi name, and tap Connect.
5.
Enter the password and tap Save.
6.
Set WLAN parameters.
1) Set the IP address, subnet mask, and gateway. Or enable DHCP and the system will allocate
the IP address, subnet mask, and gateway
automacally.
2) Tap Save.
8.4.5 General
Sengs
Set Authencaon Parameters
Set Authencaon Parameters.
Steps
1.
Tap Conguraon → General Sengs → Authencaon Sengs .
DS-K1T343 Series Face Recognion Terminal User Manual
68

HIKVISION DS-K1T343 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T343 Series
Category	Touch terminals
Language	English