DS-K2800 Serial Access Controller
25
5. Change the device IP address to the same subnet with your computer by
either modifying the IP address manually or checking the checkbox of
Enable DHCP.
6. Input the password and click the Save button to activate your IP address
modification.
6.2 Activation via Client Software
The client software is versatile video management software for multiple kinds
of devices.
Get the client software from the supplied disk or the official website, and
install the software according to the prompts. Follow the steps to activate the
control panel.
Steps:
1. Run the client software and the control panel of the software pops up, as
To Next Page
Loading...
Need help?
General
