HIKVISION DS-KABH6320-T User Manual

2.
Press a zone to pop up the zone eding dialogue box.
3.
Set the zone type, alarm type, status of arming status, entering delay, and exing delay.
4.
Tap OK to save the sengs.
Note
●
7 zone types are selectable: Panic Buon, Door Magnec, Smoke Detector, Acve Infrared,
Passive Infrared, Gas Detector, and Doorbell.
●
3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's triggered.
Set the alarm type as delay alarm, and you should set the entering delay
duraon and exing
delay duraon.
●
Both the entering delay
duraon and the exing delay duraon are from 30s to 60s.
●
For Gas Detector, Smoke Detector and doorbell, the alarm type is set as default 24h alarm.
The alarm type of them can not be changed.
Arming Mode Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and custom mode.
Before You Start
Tap Sengs → → Shortcut Sengs to enable Alarm.
Steps
Note
On the home page, the arming status funcon and zone sengs funcon are hidden by default.
You should enable the alarm funcon rst.
1.
Back to the home page, tap Sengs → → Scene Sengs to enter the arming mode sengs
page.
2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Network Indoor Staon Conguraon Guide
24

HIKVISION DS-KABH6320-T Specifications

General

Brand	HIKVISION
Model	DS-KABH6320-T
Category	Intercom System
Language	English