HIKVISION DS-KABH6320-T User Manual

Figure 4-21 DNS Sengs
Congure Mobile Client Connecon
Congure Hik-Connect server parameters before viewing videos via mobile client.
Before You Start
Make sure the indoor staon connects to the network.
Steps
1.
Click Hik-Connect to enter the
conguring the sengs page.
2.
Enable Enable Hik-Connect.
Note
●
To enable Hik-Connect service, you need to create a vericaon code or change the
vericaon code.
●
The vericaon code should be 6 to 12 leers or numbers, case sensive. You are
recommended to use a
combinaon of no less than 8 leers or numbers.
3.
Enter the Vericaon Code and conrm the vericaon code.
4.
Click OK.
5.
Enable Custom and edit Service Address.
6.
If you forget the
vericaon code, you can enable View.
7.
Click Save to enable the sengs.
8.
Oponal: Click Refresh to refresh the sengs.
Group Network
Sengs
Click Group Network Sengs to enter the group network sengs page.
Network Indoor Staon Conguraon Guide
63

HIKVISION DS-KABH6320-T Specifications

General

Brand	HIKVISION
Model	DS-KABH6320-T
Category	Intercom System
Language	English