Video Intercom Module Door Station·User Manual
2. Click to pop up the configuration interface.
3. Enter the room no. for each call button of the nametag module.
4. Click the Save button to enable the settings.
The module address is used to differentiate the sub modules. See 4.1Configure Sub
Module Address for detailed configuration instructions.
5.7 Configure Video Intercom Network
You need to configure video intercom network parameters in the network module.
Click Network in the remote configuration interface, to configure the local network,
linked network and FTP settings.
5.7.1 Local Network Configuration
Steps:
1. Click the Local Network Configuration button to enter local network configuration
interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
