EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KH6320-LE1B

HIKVISION DS-KH6320-LE1B Configuration Guide

HIKVISION DS-KH6320-LE1B
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
3.3.2 Set Linked Device IP
Linked network parameters refers to the network parameters of devices (like door staon,
doorphone, main staon, center, etc.), to which the indoor staon is linked. Linked devices for the
indoor staon refers to door staon, center, main staon, and doorphone.
With the private SIP protocol, intercom can be realized only when all these devices are in the same
network segment with the indoor
staon.
With the standard SIP protocol, intercom can be realized when all these devices support the
standard SIP protocol.
Steps
Note
The doorphone does not support adding with the standard SIP protocol.
Here take main door staon network sengs as example.
1.
Tap Sengs Conguraon to enter the device management page.
Note
Default admin password is the acvaon password.
2.
Tap Main Door Staon to pop up the device informaon dialog.
Figure 3-19 Device Informaon
Set the parameters of the linked door
staon. Tap to set parameters of the door staon.
Network Indoor Staon Conguraon Guide
17

Other manuals for HIKVISION DS-KH6320-LE1B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH6320-LE1B and is the answer not in the manual?

HIKVISION DS-KH6320-LE1B Specifications

General IconGeneral
BrandHIKVISION
ModelDS-KH6320-LE1B
CategoryIntercom System
LanguageEnglish

Related product manuals