HIKVISION DS-KH6320-LE1B Configuration Guide

3.
Select a device to link. Edit the following parameters.
Name
You can edit the name of the device.
Language
Select a language from the drop-down list for the device.
Network
Enable Auto Get IP Address and the system will assign IP address, subnet mask, and gateway
automacally. Or edit the IP address, subnet mask, and gateway manually.
Door Lock Parameters
Aer wire the lock with the door staon, you can set name and door opening duraon
according to your needs.
Note
Up to 2 locks can be congured.
Volume Sengs
Set microphone volume and output volume.
Call Number Sengs
The call No. should be the same as the indoor staon's room No. If press the call buon of
the door staon, you can call the indoor staon directly.
Public Password
You can use the public password to open the door staon related door lock. Select the public
password type. Enter the old password and new password and then
conrm the new
password. Tap OK to save the sengs.
Restore to Default Sengs
Restore All
All parameters will be restored to the factory sengs. The system will reboot to take
eect.
Device Reboot
Reboot the device.
3.3.3 Set Wi-Fi
Some indoor
staon support Wi-Fi connecon.
Note
Parts of models support seng Wi-Fi. For details, refers to actual product.
Network Indoor Staon Conguraon Guide
18

HIKVISION DS-KH6320-LE1B Specifications

General

Brand	HIKVISION
Model	DS-KH6320-LE1B
Category	Intercom System
Language	English