HIKVISION DS-KIS603-P Configuration Guide

4.
Tap Restore All to restore all parameters and reboot the system.
1.8 System Maintenance
You can format or install TF card, clear the screen, view the version informaon of
the indoor
staon and reboot the system on the system maintenance page.
Tap Sengs → to enter the general sengs page.
Figure 1-11 General Sengs Page
Password
Create the device unlock password and the duress code
Unlock
Create the indoor
staon's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
congured duress code. An alarm will be triggered to nofy the
management center secretly.
Note
The duress code and the unlock password cannot be the same.
Time and Date
You can set the displayed me and date format, current me. You can also tap
Sync Time and enable NTP to synchronize the device me.
Network Indoor
Staon Conguraon Guide
13

HIKVISION DS-KIS603-P Specifications

General

Brand	HIKVISION
Model	DS-KIS603-P
Category	Intercom System
Language	English