HIKVISION DS-KIS703-P User Manual

B. Communicaon Matrix and Device
Command
Communicaon Matrix
Scan the following QR code to get the device communicaon matrix.
Note that the matrix contains all communicaon ports of Hikvision access
control and video intercom devices.
Figure B-1 QR Code of Communicaon Matrix
Device Command
Scan the following QR code to get the device common serial port
commands.
Note that the command list contains all commonly used serial ports
commands for all Hikvision access control and video intercom devices.
Video Intercom Two-Wire Villa Door
Staon User Manual
9

HIKVISION DS-KIS703-P Specifications

General

Color	Yes
Relay inputs	2
Video codecs	H.264
Connectivity technology	Wired & Wireless
Number of displays supported	-
Voice codecs	G.711a, G.711u
Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	95 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	144 °
Power consumption (typical)	10 W
Operating voltage (door opener)	24 V
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Main monitor station operating temperature (T-T)	-10 - 55 °C
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Operating system installed	Linux
Product color	Silver
International Protection (IP) code	IP65
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, RSTP

Weight and Dimensions

Depth	140 mm
Width	200 mm
Height	23.6 mm
Weight	334.5 g
Door station dimensions (WxDxH)	169 x 110 x 31 mm