To Next Page

To Previous Page

4. Use the

acvaon user name and password to login.

Note

Refer to Acvaon chapter for the details.

5.6.1 Add/Edit/Delete Tag (Card)

You can add tag to the security control panel and you can use the tag(card) to arm/disarm the

zone. You can also edit the tag informaon or delete the tag from the security control panel.

Steps

1. In the client

soware, select the device on the Device Management page and click , or enter

the device IP address in the address bar of the web browser and log in.

2. Click Conguraon → User Management → Tag to enter the management page.

3. Click Add to enter the adding page.

4. Select the linked keypad.

5. Click OK and the card(tag)

informaon will be displayed in the list.

Note

The card supports at least 20-thousand serial numbers.

6. Oponal: Click and you can change the card(tag) sengs, including tage(card) type, related

net user, linked area, etc.

Oponal: Click to delete the card(tag).

5.6.2 Add/Edit/Delete Keyfob

You can add keyfob to the security control panel and you can control the security control panel via

the keyfob. You can also edit the keyfob informaon or delete the keyfob from the security control

panel.

Steps

1. In the client

soware, select the device on the Device Management page and click , or enter

the device IP address in the address bar of the web browser and log in.

2. Click

Conguraon → User Management → Keyfob to enter the Keyfob Management page.

Hybrid Security Control Panel User Manual

HIKVISION DS-PHA64-W4M User Manual

Questions and Answers: