Digital Video Recorder User Manual
152
11.2 Configuring Advanced Settings
11.2.1 Configuring PPPoE Settings
Purpose
The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Step 1 Go to Menu > Configuration > Network > PPPoE.
Figure 11-2 PPPoE Settings Interface
Step 2 Check the Enable PPPoE checkbox to enable this feature.
Step 3 Enter User Name and Password for PPPoE access.
The User Name and Password should be assigned by your ISP.
Step 4 Click the Apply button to save the settings.
Step 5 After successful settings, the system asks you to reboot the device to enable the new settings,
and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status
of PPPoE connection.
11.2.2 Configuring Guarding Vision
Purpose
Guarding Vision provides the mobile phone application and the service platform page
(www.guardingvision.com) to access and manage your connected DVR, which enables you to get a
convenient remote access to the surveillance system.
The Guarding Vision can be enabled via operation on SADP software, GUI and Web browser. We
introduce the operation steps on GUI in this section.
Step 1 Go to Menu > Configuration > Network > Platform Access.
Figure 11-3 Guarding Vision Settings
To Next Page
Loading...
Need help?
General
