HIKVISION iDS-TCM403-AI Operation Manual

The area will be zoomed in.
4.
Click any posion of the image to restore to normal image.
5.
Click to disable digital zoom.
2.1.10 Enable Regional Focus
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Click .
2.
Drag the cursor from the upper
le corner to the lower right corner to select the area that needs
to be focused.
Result
The selected area is focused.
2.1.11 Enable Regional Exposure
Enable regional exposure to expose paral area of the live view image.
Steps
Note
The funcon varies with dierent models. The actual device prevails.
1.
Click .
2.
Click
to enable regional exposure.
3.
Drag the cursor to select an area.
The selected area will be exposed.
4.
Click
to disable regional exposure.
5.
Oponal: You can also do the following operaons.
To display the drawn regional area.
To hide the drawn regional area.
2.1.12 Select Video Mode
Set the video mode when adjusng the device focus during construcon.
Click and select when the device is running normally.
Network Trac Camera Operaon Manual
6

HIKVISION iDS-TCM403-AI Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-AI
Category	Security Camera
Language	English