Network Traffic Camera • User Manual
7
Chapter 1 Network Connection
You shall acknowledge that the use of the product with Internet access might be under
network security risks. For avoidance of any network attacks and information leakage,
please strengthen your own protection. If the product does not work properly, please
contact with your dealer or the nearest service center.
To ensure the network security of the device, we recommend you to have the device
assessed and maintained termly. You can contact us if you need such service.
Purpose:
To view and set the device via a LAN, you need to connect the device in the same subnet with your
computer, and install the SADP to search and change the IP address of the device.
Wiring over the LAN
The following figures show the two ways of cable connection of a device and a computer.
Purpose:
To test the device, you can directly connect the device to the computer with a network cable.
Set device over the LAN via a switch or a router.
To Next Page
Loading...
Need help?
General
