HIKVISION Network Dome Camera User Manual

Installation Manual of Network Dome Camera
5
To connect to an AC/DC load, use the following diagram:
The alarm output is an on/off output that requires external power supply on connection. The
external power supply shall be 12V DC/30mA, or use AC with external relays. Equipment
damage or electric shock may cause if without relays.
2.2 Hardware Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the
following steps:
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

HIKVISION Network Dome Camera Specifications

General

Brand	HIKVISION
Model	Network Dome Camera
Category	Security Camera
Language	English