8
Screen maintenance
Before using the monitor, please read and understand all the
instructions. Damage resulting from nonobservance of the in-
structions is not covered by the warranty.
·
Try to avoid still images. A still image means that an image
stays on the screen for a long time. Still image may cause
permanent damage to the monitor screen;
·
the monitor screen to cause image blur, afterimage, local
traces, and the display is not within the scope of warranty
·
Don’t display static images for more than 2 hours on the
LCD
monitor, because it will cause the screen image blur. In order
to avoid this problem please reduce the brightness and con-
trast of the screen in the display of a still image.
·
When you watch 4:3 programs for a long time, you leave dif-
ferent marks on the left and right sides of the screen and the
edges of the image, so please don’t use this mode for a
long time.
·
Image sticking may occur if playing video games or display-
ing still images for a long time. It is caused by screen burn.
Please reduce brightness and contrast when appropriate.
·
Pull out the monitor plug before cleaning.
·
Use a soft dry cloth to wipe the monitor and frame. Do not
use alcohol, chemicals or household cleaning agent cleaning
monitor.
·
Watch out for damage to monitor screen! Do not use any ob-
ject to contact, push, rub or tap the screen.
·
In order to avoid deformation and fading, please wipe water
as soon as possible.
To Next Page
Need help?
General