HIKVISION Value Series User Manual

10
Remote control
1
2
3
5
4
6
7
8
1. Standby-Power on
When the monitor boot, it can
be switched to standby.
The monitor can be power on
when it is in standby mode.
2. Signal source
Opens the signal source
menu, select the connected
device.
3. Button
Up, down, left and right opera-
tion key & confirmation key.
4. Return
Return to the previous menu
or exit the application.
5. Homepage menu key
Enter the home page menu.
6. Mute
Mute/Unmute.
7/8. Volume key
Adjust the volume.

HIKVISION Value Series Specifications

General

Brand	HIKVISION
Model	Value Series
Category	Monitor
Language	English