Hirschmann RS40 series User Manual

Installation RS20/22/30/32/40
Release 05 12/2015
41
1.3.6 Gigabit combo port
You have the option of alternatively connecting a twisted pair cable via a
RJ45 socket or an optical fiber via a SFP transceiver to a combo port.
You obtain appropriate SFP transceivers as an accessory.
See “Accessories” on page 75.
By inserting a SFP transceiver, you deactivate automatically the
corresponding twisted pair interface.
 10/100/1000 Mbit/s twisted pair port
See “10/100/1000 Mbit/s twisted pair port” on page 38.
 100/1000 Mbit/s F/O port
This port is an SFP slot.
The 100/1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 100BASE-FX/1000BASE-
SX/1000BASE-LX standard.
This port supports:
 1000 Mbit/s full duplex
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
State on delivery:
 100 Mbit/s full duplex when using a Fast Ethernet SFP transceiver
 1000 Mbit/s full duplex when using a Gigabit Ethernet SFP transceiver
Media type Connection options
twisted pair cable Technical standard IEEE 802.3 10BASE-T/100BASE-
TX/1000BASE-T
Connection type RJ45
Fiber optic cable either Technical standard IEEE 802.3 100BASE-FX
Connection type Fast Ethernet SFP transceiver
or Technical standard IEEE 802.3 1000BASE-SX/LX
Connection type 1 Gigabit Ethernet SFP transceiver
Table 10: Combo ports: Connection options

Hirschmann RS40 series Specifications

General

Brand	Hirschmann
Model	RS40 series
Category	Switch
Language	English