Installation RSPM
Release
15
04/2018
25
2Installation
The devices have been developed for practical application in a harsh
industrial environment.
Hirschmann supplies the media modules ready for operation.
To configure a subdomain, follow these steps:
Checking the package contents
Mounting a media module
Installing an SFP transceiver (optional)
Connecting data cables
2.1 Checking the package contents
Proceed as follows:
Check whether the package includes all items named in the section
“Scope of delivery” on page 35.
Check the individual parts for transport damage.
2.2 Mounting a media module
The media modules provide restricted hot-swap-capability. You have the
option of mounting the media modules while the device is operating. To start
the operation, it is necessary to restart the device.
Proceed as follows:
Remove the cover panel (if mounted) from the media module slot on the
device.
Insert the media module into the slot on the device.
Fasten the media module to the device by tightening the 2 screws.
Restart the device.
To Next Page
Loading...
Need help?
General
