To Next Page

To Previous Page

English

Installing the Stand

CAUTION

Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount

brackets.

The LED display is very fragile, and must be protected at all times when installing

the base stand. Be sure that no hard or sharp object, or anything that could scratch

or damage the LED display, comes into contact with it. DO NOT exert pressure on

the front of the TV at any time because the screen could crack.

Follow the illustrations and textual instructions below to complete the installa-

tion steps:

Product images are only for reference, actual product may vary in appearance.

NOTE

1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the

TV or scratching to the screen.

2. Remove the 2 stands from the accessory bag and then insert the stands into the

bottom slots of the TV.

3. Secure the BASE STAND to the TV with the 4 screws in accessary tightly.

BASE STAND

Screws:

ST4×12(32K220W)

M4×12(40K220PW)

M4×20(50K220PW)

WALL-MOUNT BRACKET (not provided)

100

32''/40''

50''

M4 (32''/40'')

M6 (50'')

8~9.5mm(32''/40'')

9.5~11.5mm(50'')

Hisense 32K220W User Manual

Questions and Answers: