Hisense 40D50P User Manual

2 English
Installing the Stand
Installing the Stand
NOTES
The TV screen is very fragile,and must be protected at all times when removing the
base stand.Be sure that no hard or sharp object,or anything that could scratch or
damage the screen,come into contact with it.DO NOT exert pressure on the front of
the TV at any time because the screen could crack.
For tabletop use,the TV must be attached to the provided stand as shown on this
page.
Product images are only for reference, actual product may vary in appearance.
WARNING
Be sure to disconnect the AC power cord before installing a stand or wall-mount
brackets.
CAUTION
Carefully place your TV facedown on a soft,cushioned surface to prevent damage
to the TV or scratching to the screen.
Follow the illustrations and textual instructions below to complete the installa-
tion steps:
1. Attach the stand to the TV set as shown in the picture.
2. Use the screws (ST4 × 12F) × 4 (32
˝
), (ST4 × 14F) × 4 (40
˝
) to fix the stand tightly.
Screws: ST4 × 12F (32
˝
)
ST4 × 14F (40
˝
)
BASE STAND

Hisense 40D50P Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	40 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Screen format adjustments	4:3, Auto, Zoom
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D	No
Battery type	AAA
Supported file systems	FAT, FAT32, NTFS, exFAT
Logical Channel Number (LCN)	Yes
Number of batteries supported	2
Operating relative humidity (H-H)	20 - 80 %
HDMI version	1.4
RF ports quantity	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity	0
Tuner type	Analog & digital
Analog signal format system	PAL, PAL B, PAL BG, PAL DK, SECAM, SECAM B/G, SECAM D/K
Digital signal format system	DVB-T
Audio formats supported	AAC, AC3, MP3
Video formats supported	ASF, AVI, FLV, H.264, H.264 BP, MKV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPEG4-ASP, MPEG4-SP, MPG, PS, TS, VOB
Product color	Black
Panel mounting interface	200 x 200 mm
Programming period	7 day(s)
Audio decoders	Dolby Digital, Dolby Digital AC3
RMS rated power	14 W
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Remote control type	IR / ER‐22601A
Package depth	149 mm
Package width	1005 mm
Package height	621 mm
Package weight	10500 g
Operating temperature (T-T)	5 - 45 °C

Weight and Dimensions

Depth (with stand)	204 mm
Height (with stand)	563 mm
Weight (with stand)	8200 g
Depth (without stand)	86 mm
Width (without stand)	902 mm
Height (without stand)	523 mm
Weight (without stand)	8000 g