Hisense 43A6GV User Manual

4
Getting started
Step 1. Attach stand or mount
Before you start using your TV, attach your TV stand or mount it on the wall.
CAUTION:
• Disconnect the AC power cord before installing a stand or a wall mount bracket.
• The LED display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
• After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Attach the TV stand
To attach the TV stand legs to your TV:
1. Carefully place your TV face down on a clean, soft and at surface.
2. Insert the TV base stands into the bottom slots on your TV.
3. Use the screws provided to secure each leg tightly.
43
"
/50
"
/55
"
(109.2 cm/127.0 cm/139.7 cm)
Screws:
M4×16 (43")(109.2 cm)
M4×12 (50"/55")(127.0 cm/139.7 cm)
Base Stand
Base Stand
Screws:
M4×16 (43")(109.2 cm)
M4×12 (50"/55")(127.0 cm/139.7 cm)

Hisense 43A6GV Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	42.5 \
Display brightness	- cd/m²
Display technology	-
Native aspect ratio	16:9
Operating system installed	Android
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 Pro (HDR10 Pro)
Audio decoders	DTS Virtual:X
RMS rated power	14 W
Number of speakers	2
AC input voltage	120 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	100 W
PC in (D-Sub)	No
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Product color	Black
Panel mounting interface	200 x 300 mm