Hisense 50A7G User Manual

2
Follow the illustrations and textual instructions below to complete the installation steps:
Installing the Stand
Installing the Stand or Wall Mount Bracket
1. Carefully place your TV facedown on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
For 50"/55"
Base Stand
Base Stand
Screws
：
M4×12
Screws
：
M4×12

Hisense 50A7G Specifications

General

Screen shape	Flat
LED backlight	Yes
Display diagonal	50 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Display diagonal (metric)	126 cm
Motion interpolation technology	-
Tuner type	Digital
Digital signal format system	DVB-T, DVB-T2
Operating system version	U5
Operating system installed	VIDAA
Audio decoders	Dolby Atmos, Dolby Digital
RMS rated power	10 W
Number of speakers	2
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Product color	Black, Grey
Panel mounting interface	300 x 200 mm
Game features	Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR)
Processor cores	4
Video formats supported	MPEG2, MPEG4
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
Package type	Box
Package depth	781 mm
Package width	1231 mm
Package height	139 mm
Package weight	14000 g
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	- W
Programming period	7 day(s)
HDMI version	1.4
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth (with stand)	257 mm
Width (with stand)	1117 mm
Height (with stand)	710 mm
Weight (with stand)	10800 g
Depth (without stand)	77 mm
Height (without stand)	647 mm
Weight (without stand)	10400 g